Abus 7603 Montageanleitung Pdf 125
Abus 7603 Montageanleitung Pdf 125 === https://byltly.com/2tvwzc
How to Install ABUS 7603 Door Closer
If you want to prevent your doors from slamming and ensure a safe and quiet closing, you might want to consider installing a door closer. A door closer is a device that automatically closes a door after it has been opened. One of the models you can choose is the ABUS 7603 door closer, which is suitable for house and apartment doors up to 1.10 meters wide. In this article, we will show you how to install the ABUS 7603 door closer in a few simple steps.
What You Need
Before you start, make sure you have the following tools and materials:
ABUS 7603 door closer (white, brown or silver)
Wooden dowels (optional)
Step 1: Determine the Mounting Position
The ABUS 7603 door closer can be mounted on either the hinge side or the opposite side of the door. Depending on your preference, you can choose between two mounting positions: standard or parallel. The standard position is more common and requires less space, while the parallel position is more discreet and allows a wider opening angle of the door. Refer to the installation manual[^1^] for the exact dimensions and measurements for each position.
Step 2: Mark the Drilling Holes
Once you have decided on the mounting position, use a pencil and a measuring tape to mark the drilling holes on the door leaf and the door frame according to the installation manual[^1^]. Use a level to ensure that the marks are aligned horizontally and vertically.
Step 3: Drill the Holes and Insert Dowels
Using a drill, make holes on the marked positions with a diameter of 4 mm and a depth of 40 mm. If your door is made of wood, you can skip this step. If your door is made of metal or plastic, you might need to insert wooden dowels into the holes to secure the screws.
Step 4: Attach the Door Closer Body and Arm
Using a screwdriver, attach the door closer body to the door leaf with four screws. Make sure that the valve is facing downwards. Then, attach the arm to the door frame with two screws. Depending on your mounting position, you might need to adjust the angle of the arm with a hex key.
Step 5: Connect the Arm and Adjust the Closing Force
Connect the arm to the door closer body by inserting the pin into the hole. You can choose between three different holes to adjust the closing force of the door closer. The higher the hole, the stronger the closing force. Use a hex key to secure the pin with a screw. Finally, use a screwdriver to adjust the valve on the door closer body to regulate the closing speed of the door.
You have successfully installed your ABUS 7603 door closer. Now you can enjoy a smooth and silent closing of your doors. If you have any questions or problems, please contact ABUS customer service[^2^] for assistance. aa16f39245